IGET is a brand name frequently mentioned in online discussions about disposable electronic cigarettes. Australian consumers researching IGET products may come across models such as the IGET ONE 12000 and IGET BAR PRO 10000.
These devices are often listed in online product catalogues with different designs, advertised puff counts, battery configurations and flavour ranges. However, advertised specifications may not always accurately reflect real-world performance, and information published online may differ from the specifications provided by the manufacturer.
In this guide, I'll introduce two frequently discussed IGET models, examine their advertised features, answer common consumer questions and explain the relevant Australian regulations that readers should understand.
1. What Is an IGET Vape?
IGET is a brand associated with several electronic vaping device models.
Electronic cigarettes generally operate by using battery power to heat e-liquid and produce an aerosol, commonly referred to as vapour.
Depending on the specific model, a vaping device may contain the following components:
Built-in battery
E-liquid reservoir
Heating coil or atomiser
Airflow sensor
Mouthpiece
Electronic control circuitry
Battery level or operating mode indicator
Different devices may use different combinations of these components.
IGET product descriptions frequently mention features such as mesh coils, draw activation, battery indicators and advertised puff counts.
However, these features still need to be verified through technical testing and documentation for the specific product version.
2. IGET ONE 12000: Advertised Features and Design
The IGET ONE 12000 is an electronic vaping device advertised as delivering up to 12,000 puffs. However, this figure generally depends on specific operating conditions.
Some online product specifications indicate that the device has two operating modes: Regular and Turbo.
Understanding Regular and Turbo Modes
Regular Mode and Turbo Mode are described as two different operating settings.
In general, a higher-power operating mode may increase the rate at which the heating element consumes battery energy and e-liquid.
As a result, the actual number of puffs may vary between operating modes, and the advertised maximum puff count may not apply equally to both settings.
Dual Mesh Coil Technology
Some IGET ONE 12000 product listings describe the device as using a Dual Mesh Coil system.
Unlike a traditional single heating wire, a mesh coil uses a mesh-shaped heating element.
However, actual vapour production still depends on several factors, including the heating structure, electrical output, e-liquid delivery and operating conditions.
Battery and E-Liquid Information
Third-party product descriptions often include battery capacity and e-liquid volume.
However, because specifications may differ between websites, exact figures should be verified against reliable manufacturer documentation.
Consumers should not attempt to charge a device unless its specific model has been confirmed as rechargeable and appropriate charging instructions are available.
3. IGET BAR PRO 10000: Advertised Features
The IGET BAR PRO 10000 is another model frequently featured in online IGET product catalogues.
Its product name refers to an advertised maximum of 10,000 puffs.
Like other electronic cigarettes, the device relies on a battery, heating element and e-liquid delivery system to produce vapour.
Some online product listings indicate that the IGET BAR PRO 10000 differs from the IGET ONE 12000 in external design, flavour naming and internal construction.
However, without independently verified technical documentation, it is not possible to confirm the accuracy of every advertised specification or performance claim.
4. What Is the Difference Between IGET ONE 12000 and IGET BAR PRO 10000?
The following table compares information commonly advertised for these two devices in online product listings.
FeatureIGET ONE 12000IGET BAR PRO 10000Advertised maximum puff countUp to 12,000 puffsUp to 10,000 puffsProduct typeElectronic vaping deviceElectronic vaping deviceOperating modesRegular and Turbo mentioned in some listingsModel-specific information requires verificationHeating systemDual mesh coil mentioned in some listingsExact configuration requires verificationFlavour rangeModel-specific advertised flavoursModel-specific advertised flavoursActual lifespanDepends on operating conditionsDepends on operating conditionsIt is important to understand that 12,000 puffs and 10,000 puffs represent advertised maximum figures. These numbers do not guarantee that every device will deliver exactly the same number of puffs.
5. What Does the Advertised IGET Puff Count Actually Mean?
One of the most common questions consumers ask about IGET devices concerns the advertised number of puffs.
For example, what does 12,000 puffs actually mean?
Advertised puff counts are generally estimates based on particular testing conditions and assumptions.
The actual number of puffs may vary depending on several factors.
Puff Duration: Longer inhalations generally keep the heating system active for a longer period, potentially consuming more battery energy and e-liquid.
Operating Mode: Different power settings may affect battery consumption and e-liquid usage.
Battery Performance: In some cases, the battery may become depleted before all the remaining e-liquid has been consumed.
Atomisation Efficiency: The condition of the heating coil and the delivery of e-liquid may affect vapour production.
Manufacturing Variations: Even devices of the same model may not perform identically.
Therefore, an advertised maximum puff count does not mean that every device will necessarily provide the same number of puffs.
6. Understanding IGET Vape Flavour Names
IGET products have been advertised online using a wide variety of flavour names.
Some third-party product catalogues have included the following examples:
Blueberry Ice
Strawberry Kiwi Ice
Mango Ice
Grape Ice
Kiwi Pineapple
Blueberry Raspberry
Chupa Chups Strawberry
Peach Ice
These names are marketing descriptions rather than complete ingredient declarations.
They also do not establish whether a particular product is genuine, still being manufactured or legally available for supply in Australia.
Australian therapeutic vaping standards restrict permitted flavours to mint, menthol and tobacco.
7. Why Do Different Websites Display Different IGET Specifications?
When researching IGET devices, consumers may notice conflicting information across different websites.
For example, two websites may list different battery capacities or operating features for what appears to be the same product model.
There are several possible explanations for these differences.
Different Product Versions
Manufacturers may introduce revised product versions or offer different configurations for different regions.
Outdated Product Catalogue Information
Older product descriptions may remain online even after product specifications have changed.
Inaccurate Third-Party Information
Some websites may copy product information from other retailers without independently verifying its accuracy.
Counterfeit or Incorrectly Labelled Products
Product packaging, branding and technical descriptions can be copied or modified.
For these reasons, consumers should avoid relying on a single unverified website when determining the actual specifications of an IGET device.
8. How Can You Identify a Potentially Counterfeit IGET Product?
Counterfeit electronic cigarettes can make it more difficult for consumers to determine a product's actual ingredients, battery construction and electrical safety.
When reviewing product information, consider the following factors.
Branding: Check whether the brand name, product model and printed information are consistent.
Packaging: Look for printing errors, unusual labels or conflicting product details.
Verification Links: Be cautious of QR codes that direct users to suspicious or unrelated websites.
Technical Specifications: Compare advertised specifications with reliable technical documentation.
Product Condition: Damaged packaging, leaking e-liquid or visible device defects may indicate potential safety risks.
It is important to remember that even if a QR code works correctly or the packaging looks professional, these factors alone do not prove that a device is genuine.
9. Are IGET Disposable Vapes Legal in Australia?
Australia introduced major vaping regulatory reforms beginning in 2024 and further strengthened its therapeutic vaping product standards in 2025.
Under Australia's national regulatory framework:
The commercial supply of disposable single-use vapes is prohibited.
Non-pharmacy retailers cannot legally sell vaping products to consumers.
Compliant therapeutic vaping products may be supplied through participating pharmacies, subject to applicable requirements.
Permitted therapeutic vaping flavours are restricted to mint, menthol and tobacco.
Public advertising of vaping products is generally prohibited, except in limited authorised circumstances.
For adults aged 18 and over, certain therapeutic vaping products containing no more than 20 mg/mL of nicotine may be available without a prescription following consultation with a pharmacist, provided the applicable state or territory requirements are met.
A prescription is required in other circumstances.
10. Common IGET Vape Problems and Safety Considerations
Consumers frequently ask questions about vaping devices that produce less vapour, display blinking indicator lights, experience battery problems or suddenly change their operating behaviour.
These symptoms may have several possible causes, including:
Battery depletion
Airflow sensor failure
Heating coil problems
Insufficient e-liquid delivery
Internal electronic circuit faults
If a device develops a fault, it should not be dismantled or modified.
Stop using the device if it overheats, leaks, becomes damaged, produces an unusual smell or activates unexpectedly.
Because electronic vaping devices may contain lithium batteries, discarded devices should be handled according to local battery recycling and electronic waste disposal requirements.
11. Frequently Asked Questions About IGET Vapes in Australia
Q1. What Is the Difference Between IGET ONE 12000 and IGET BAR PRO 10000?
These two devices differ in their advertised puff counts, external designs and product descriptions.
Some online sources also describe the IGET ONE 12000 as having two operating modes: Regular and Turbo.
Q2. Can the IGET ONE 12000 Really Deliver 12,000 Puffs?
Not necessarily.
The advertised 12,000-puff figure represents a maximum claim under particular conditions.
Actual device lifespan may vary depending on puff duration, battery performance and operating mode.
Q3. Are IGET Vapes Rechargeable?
Rechargeability depends on the specific model and product version.
Consumers should not attempt to charge a device unless the manufacturer has confirmed that it supports charging.
Q4. Why Has My IGET Vape Suddenly Stopped Producing Vapour?
Possible causes include battery depletion, airflow sensor failure, heating coil problems or an internal electronic circuit fault.
Q5. Are All Advertised IGET Flavours Legal in Australia?
No.
Australian therapeutic vaping standards permit only mint, menthol and tobacco flavours. Fruit and candy-flavoured combinations are not permitted.
Q6. Can I Buy IGET Disposable Vapes from an Australian Online Store?
Australia prohibits the commercial supply of disposable single-use vapes.
Compliant therapeutic vaping products must be supplied through participating pharmacies under the applicable legal framework.
Q7. How Can I Check Whether a Vaping Product Meets Australian Requirements?
Consumers can consult the Therapeutic Goods Administration's (TGA) Notified Vape List and the relevant product standards.
However, inclusion on the notified list generally means that a sponsor has declared compliance with the applicable requirements. It does not mean that the TGA has independently approved the product's safety or effectiveness.
Final Thoughts: Understanding IGET Vape Models in Australia
The IGET ONE 12000 and IGET BAR PRO 10000 are two models frequently mentioned in online discussions about electronic cigarettes.
According to advertised product information, they differ in puff counts, device design, operating features and flavour names.
However, consumers should distinguish marketing claims from independently verified technical specifications and recognise that actual device performance may vary depending on operating conditions.
By consulting reliable technical documentation, understanding how to recognise potentially counterfeit products and referring to official TGA guidance, Australian readers can develop a more accurate understanding of IGET vaping devices and related product information.