Why Is My IGET Vape Not Working? 7 Co Causes Explained

If your IGET vape is not working, you might be wondering why it suddenly stops producing vapour or doesn't respond when you inhale.

This is one of the common problems associated with disposable electronic cigarettes. Devices such as the IGET BAR, IGET ONE and other IGET models may all experience similar issues.

There are several possible reasons why an IGET vape stops working, including a dead battery, airflow sensor problems, a damaged heating coil or insufficient e-liquid.

However, not every device malfunction means that your vape is completely empty.

In this article, I'll explain seven common reasons why an IGET vape may stop working, what different symptoms could indicate, and when you should stop using the device.

1. IGET Vape Battery Is Dead

One of the most common reasons an IGET vape stops working is battery depletion.

Disposable electronic cigarettes use an internal battery to power the heating coil. When the battery can no longer supply enough power, the device may stop producing vapour.

Common symptoms include:

• The device does not respond when you inhale.

• The indicator light does not turn on.

• Vapour production becomes weak or inconsistent.

• The device suddenly stops activating.

It's worth noting that some devices may still contain e-liquid even after their batteries have stopped working.

Important: Not all IGET vape models are rechargeable. Unless you can confirm that your specific model supports charging and has appropriate product instructions, do not attempt to charge the device.

2. IGET Vape Light Is On but No Vapour Comes Out

Sometimes, the indicator light on an IGET vape works normally, but the device does not produce any vapour.

This may mean that the airflow sensor or part of the electronic circuit is still responding, while the internal heating system is not functioning correctly.

There are three possible causes:

• A damaged heating coil.

• Insufficient battery output.

• An internal electronic circuit fault.

It is important to understand that an illuminated indicator light does not necessarily mean the device is working properly.

If the problem continues, I would not recommend taking the device apart or attempting to repair its internal electronic components, as doing so may damage the product and create safety risks.

3. IGET Vape Airflow Sensor Problems

Many IGET vape devices use a draw-activated system.

Unlike devices that require you to press a button, these vapes usually detect changes in airflow when you inhale and automatically activate the internal heating element.

If the airflow sensor stops responding correctly, the device may fail to activate.

Four common symptoms include:

• No response when inhaling.

• The device sometimes activates but fails at other times.

• E-liquid remains inside, but no vapour is produced.

• The indicator light behaves unusually or inconsistently.

Airflow sensor problems may be caused by damaged internal components or interference with normal airflow detection.

Because disposable electronic cigarettes contain integrated electronic components, I would not recommend dismantling the device or attempting to repair the airflow sensor yourself.

4. IGET Vape Has Run Out of E-Liquid

Another possible reason is that the device has run out of usable e-liquid.

When the heating coil cannot receive enough e-liquid, vapour production may gradually decrease or stop completely.

Three common signs include:

• A noticeable reduction in vapour production.

• Flavour becoming weaker over time.

• A burnt taste.

However, these symptoms do not necessarily prove that the e-liquid reservoir is completely empty.

Battery or heating coil problems may cause similar symptoms.

If the device continues to produce a burnt taste, stop using it immediately rather than continuing to activate the heating element.

5. Why Is My IGET Vape Light Blinking?

If your IGET vape indicator light keeps blinking, it may indicate a problem with the battery or internal electronic system.

However, different IGET models may use different indicator systems, so it is important not to assume that every flashing light indicates the same problem.

These are possible explanations for common device problems rather than official fault codes that apply to every IGET model.

If you want to understand what a particular indicator light pattern means, I recommend checking the official product instructions for your specific model.

6. IGET Vape Heating Coil Problems

The heating coil is one of the most important components inside an electronic cigarette.

It converts electrical energy into heat, allowing the e-liquid to form an aerosol.

If the heating coil becomes damaged or stops functioning properly, the device may produce less vapour or stop producing vapour entirely.

Three possible causes include:

• Ageing or deterioration of internal coil components.

• Insufficient e-liquid delivery.

• Internal electrical circuit failure.

A damaged heating coil may also cause an unusual taste or inconsistent vapour production.

Because disposable IGET vapes generally use integrated heating components, users should not attempt to dismantle the device or replace the heating coil themselves.

7. Why Did My IGET Vape Stop Working Early?

Many users may notice that their IGET vape stops working before reaching its advertised puff count.

For example, the IGET ONE 12000 is advertised to provide up to 12,000 puffs. However, this does not mean that every device will achieve exactly 12,000 puffs under real-world conditions.

The actual lifespan of the device depends on several factors:

• Puff duration: Longer draws generally consume more e-liquid and battery power.

• Battery performance: The battery may stop supplying sufficient power before all the e-liquid has been consumed.

• Operating mode: Different output modes may affect the device's energy consumption.

• Coil efficiency: Changes in heating performance may affect vapour production.

• Manufacturing variations: Individual devices may have slightly different performance characteristics.

Therefore, advertised puff counts are generally estimates or marketing claims based on particular testing conditions or assumptions, rather than exact results guaranteed for every user.

8. When Should You Stop Using an IGET Vape?

Not every electronic cigarette malfunction is simply a performance issue.

If your IGET vape shows any of the following signs, you should stop using it immediately:

• The device becomes unusually hot.

• E-liquid starts leaking.

• The casing or internal components show visible damage.

• The device produces an unusual smell.

• The battery shows signs of swelling.

Do not puncture, dismantle, crush or attempt to modify the internal battery.

Faulty lithium-battery devices may present fire hazards or cause personal injury.

In Australia, used electronic cigarettes should be disposed of according to local battery and electronic waste recycling regulations, rather than being placed in ordinary household rubbish where such disposal is prohibited.

9. Frequently Asked Questions About IGET Vape Problems

Why is my new IGET vape not working?

Even a brand-new IGET vape may fail to activate because of manufacturing defects, battery faults, airflow sensor problems or other internal electronic issues.

Just because a device has never been used does not necessarily mean that all its internal components are functioning correctly.

Why is my IGET vape not producing vapour?

Possible causes include a dead battery, insufficient e-liquid, a damaged heating coil, airflow sensor failure or internal electronic circuit problems.

Why is my IGET vape blinking but not producing vapour?

A flashing indicator light may suggest a battery or electronic system problem.

The exact meaning depends on the specific device model and should be checked against verified product documentation.

Can an IGET vape stop working even when e-liquid remains inside?

Yes, this can happen.

Even if some e-liquid remains inside the device, battery depletion or an electronic circuit failure may prevent it from producing vapour.

Why did my IGET vape stop working after only a few days?

Possible reasons include battery life limitations, internal component failures, differences in puff duration or manufacturing variations.

The advertised maximum puff count does not guarantee that the device will last for a fixed number of days.

Can I open my IGET vape to repair it?

I would not recommend doing so.

Dismantling a disposable electronic cigarette may damage the internal battery and create electrical, chemical leakage or fire hazards.

Final Thoughts: Why Is My IGET Vape Not Working?

If your IGET vape is not working, the problem may be related to the battery, airflow sensor, heating coil, e-liquid supply or internal electronic components.

A device that stops producing vapour is not necessarily completely out of e-liquid. Similarly, flashing indicator lights may have different meanings depending on the IGET model.

Understanding these possible causes can help explain why an electronic cigarette may suddenly stop working, rather than assuming that it has reached the end of its lifespan based solely on the advertised puff count.

If the device becomes unusually hot, starts leaking or shows signs of battery damage, stop using it immediately instead of attempting to repair it yourself.

For Australian users, it is also important to follow local safety and disposal requirements for lithium-battery electronic devices.